North America’s Best Foam Manufacturer
Denko Foam has been in the foam business since 1977, and today is one of North America’s largest foam manufacturers. Denko produces a wide range of foam and fire department products, including:
- High Expansion AB Foam
- 3-6% AFF Concentrate
- No-Flash Emulsifier
- Turn-Out Clean
Drench™ for Class “A” and “AB” Fires
Drench is a liquid additive that dramatically reduces knock down times on class “A” and “AB” fires. Drench combines the properties of several foam products to produce “Super Concentrate” that
- increases penetration by up to 400%, friction loss is reduced and
- reduces friction by as much as 45%
- cools quickly with vaporization occurring twice as fast as other products
Fire departments are cutting knock-out times in half and reducing water usage by as much as two-thirds.
Use Drench™ on Different Fire Types:
Drench can be used to safely and quickly extinguish any fire that would normally be treated with water, including,
- wood structures,
- trash compactors,
- automobiles and
Reduce Knockdown Time by 50%!
Drench is poured directly into the water supply at a rate of one quart to five hundred gallons of water. Dispersion is immediate and no special equipment is required. Drench can also be diluted with five gallons of water and then picked up with an eductor at a one per cent flow. Add an ounce to a pressurized water extinguisher, Hudson sprayer or Indian tank for incomparable performance, as well.
Compare Class “A” Foam To Drench
|Class A Foam||drench|
|Cuts knockout times||20%||50%|
|Avg. cost 500 gals. finished product||$65.00||$19.95|
|Used with foam eqt.||Yes||Yes|
|Used in tanks, backpacks, extinguishers||No||Yes|
|Slippery – fire fighters can fall||Yes||No|
|Can cover evidence of arson||Yes||No|
|Pre-measured for accuracy and ease||No||Yes|
Class “AB” High Expansion Foam
Fills Rooms with Billowy Foam
Class A-B High Expansion Foam offers unmatched versatility and great economics. It’s used at 1/2 to 1% flow with any standard foam system or compressed air foam system for class “A” fire fighting, or through a foam generator for room filling billowy foam “A, B & C” situations.
Use on Standard Foam Equipment
Class “AB” High Expansion Foam can be used through standard foam equipment at a 3% flow for most class “B” situations, including small flammable liquid spills. Usage with salt or fresh water, indefinite shelf life, versatility, and low cost make this product a must for every fire fighting agency.
3% to 6% AFFF Aqueous Film Forming Foam
For Flammable Liquid Fires
AFFF 3-6% at single or double strength is a multi-purpose foam for hydrocarbons and polar solvents, as well as water miscible flammable liquids such as alcohol, gasahol, ketones and amides. AFFF 3-6% offers extremely fast knockout, high fluidity, long residual and no re-ignition. Used at 3% for hydrocarbons and 6% for polar solvents.
Requires no Special Equipment
AFFF 3-6% requires no special equipment, any standard foam system is fine. It’s also freeze protected, boasts an indefinite shelf-life and can be used with salt or fresh water.
Renders Flammable Liquid Spills Non-Flammable
Flash Preventing Emulsifier renders most flammable liquid spills non-flammable and makes them easy to clean up. For most everyday spills, pour No Flash Emulsifier directly in at a rate of 20 to 1 (10 to 1 for extremely volatile liquids), agitate and flush with water until milky. The area will be totally safe from ignition, doubly protected with an added film forming agent and the hazardous liquid broken down for easy and natural cleanup.
Biggest Breakthrough in Firefighting in Years
For large spills you use the same product at a 1% flow through a conventional foam system, a little more agitation and flush away the problem. No Flash Emulsifier is biodegradable, has an indefinite shelf-life, and at a fraction of the cost of foam is definitely the biggest breakthrough in fire fighting technology in years.
Fire Truck Wash and Wax
Easiest Way to Shiny Clean Fire Trucks!
Denko Fire Truck Wash And Wax is the easiest way to keep your fire trucks looking great. It is the cheapest, fastest and easiest way of cleaning and polishing a vehicle available anywhere.
- Brush or spray it on,
- Let it sit for a minute,
- Hose or rinse it off.
High Gloss Shine with Spray and Rinse
That’s all there is to it. Trucks don’t even have to be wiped dry because there are never any spots. When the material dries it leaves a high gloss shine because of the built-in wax. So when the trucks come in, just put it on, rinse it off and the trucks are cleaned and polished in one easy step and it just takes a couple of minutes.
With a minimum diluton rate of 200 to 1 with water, it is also the most economical product on the market. To top it off, the thin coat of wax is removed everytime you wash, eliminating any wax buildup and leaving your vehicles always looking new.
Use on all Modern Turn-out Gear Fabrics
Turn-Out Clean is a biodegradable product that cleans turn out gear easily, safely and inexpensively. It can be used on all modern turn-out gear fabrics, including Nomex, PBI, Kevlar, Reflexite and Scotchlite.
Spray on and Rinse Off!
Turn-Out Clean is also great for helmets, boots, face shields and other accessories. Just spray it on, let it sit for a moment, then rinse it off. That’s it! And the hydrocarbons are left where they came from.
Leaves Gear 100% NFPA and OSHA Compliant
Turn-Out Clean is a blend of powerful, yet safe, synthetic detergents lifts out dirt, grease, grime and soot. Hydrocarbons are completely removed leaving the garment 100% NFPA and OSHA compliant.
Concentrates are very powerful cleaners, but they are rarely used at the proper dilution rate and are extremely difficult to rinse. Gear may look good to the naked eye, but closer scrutiny reveals film and residue left behind. Eventually that buildup will prevent the complete removal of all hydrocarbons.
One Quart Cleans 15 Sets of Turn-out Gear
Unlike concentrates, Turn-Out Clean is properly diluted at the factory and does not contain much solids. As a result, it is easily rinsed out and leaves no film or residue. It’s also easier, less expensive and often more effective without the wear and tear caused by continuous cleaning in washing machines. However, if you prefer using a machine, you can use Turn-Out Clean in the machine.
Turn-Out Clean is also very economical. On average, you can clean 15 sets of gear with just one quart.